Overhead Door Frame Extensions - Frame Extension Expanding Overhead Infill Head Panels

Door Frame Extensions - Expanding Side Panels & Overhead Infill Head Panels

NOTE - THESE ARE ONLY COMPATIBLE  WITH OUR GEN2/V2 STEEL SECURITY DOOR SEEN HERE.

PLEASE NOTE - STOCK STANDARD SIZED 2035mm h x 840mm/940mm/1040mm w. For any sizes in between 840mm - 1140mm, we stock expansion infil panels which simply clip on the side of the door and wind out with an allen key to fill desired gap. 2 sizes available depending on the size of the gap - see selection table for assistance to make any stock door fit a custom sized aperture.  35mm or 55mm side / top expansion infil panels can be added to fit any aperture from 840mm - 1140mm / 2035mm h - 2090mm h. See table below for details & instructions

Infil panel selection table to suit any aperture ie. if you have an aperture 900mm w x 2070mm h, select the 840mm door + 55mm side panel to make 900mm width. Then select the 35mm header panel to increase height from standard 2035mm h to 2070mm.

See instructions  here for details.

See Technical Drawing & Dimensions Here.

2 sizes available in 4 colours: 

Side Panels 

- 35mm kit: 10mm (1 side only) to 60mm (2 sides)

- 55mm kit: 35mm (1side only) to 100mm (2 sides)

Overhead Panels (HEADER panel is 1 length 1140mm and installer needs to cut to size to suit custom width)

- 35mm kit: from 15mm - 30mm extension

- 55mm kit: from 35mm - 50mm extension

-75mm kit: from 55mm to 70mm extension

(HEADER panel is 1 length 1140mm and installer needs to cut to size to suit custom width)

Colours

- RAL 9003 WHITE (painted both sides in/out)

- RAL 7016 ANTHRACITE GREY (painted both sides in/out)

- RAL 9005 JET BLACK (painted both sides in/out)

- RAL 6007 JUNIPER GREEN (painted both sides in/out)